M8100 Series Arbitrary Waveform Generators
Getting Started Guide
2 Basic Setup for
M8100
Step 1 - Unpacking the shipment / 36
Step 2 - Setting up the M8100 series of modules / 37
Step 3 - Setting up the External Host Computer (not required for
M8100A-BU6)
/ 37
Step 4 - Connecting the M9505A AXIe Chassis to a Power Supply / 39
Step 5 - Connecting the M8100 series AWG modules / 40
Step 7 - Powering Up (if connecting via PCIe) / 54
Step 8 - Verifying Basic Operation of M8100 series AWG modules / 55
Step 9 - Installing Keysight IO Libraries Suite (not required for
M8100A-BU6)
/ 56
Step 10 - Installing M8070B Software (not required for M8100A-BU6) /
56
Step 11 - Starting the M8070B Software / 57
Step 12 - Installing Module Driver Package in the M8070B Software / 58
Step 13 - Installing the Licenses / 59
Step 14 - Starting the Driver Package Interface from M8070B Software /
60
Step 15 - Enabling/Disabling the Interleaving Mode in M8199A modules /
64
Step 16 - Powering off the Chassis and Modules (If Required) / 65
To Next Page
Loading...
