60 M8100 Series Arbitrary Waveform Generators Getting Started Guide
2 Basic Setup for M8100A
The following procedure shows how to redeem and install a module
license.
1 Locate the Software License Entitlement Certificate (email or paper
copy).
2 Follow the instructions on the Software License Entitlement Certificate
to redeem your license.
3 You will receive a license file (in an email). The file has the suffix .lic.
4 Follow the instructions in the email to complete the installation of the
license file.
5 In the M8070B software interface, verify that the license has been
installed by selecting Utilities > Licenses then viewing the license
status in the Installed column.
Step 14 - Starting the Driver Package Interface from M8070B Software
1 In Windows click on Start > Keysight M8070B > Keysight M8070B.
2 From the M8070B Startup Options dialog box, select a driver package.
• To view the parameters for M8199A and M8008A modules, select
M8008A,M8199A
• To view the parameters for M8199B and M8008A modules, select
M8008A,M8199B
• To view the parameters for M8198A and M8008A modules, select
M8008A,M8198A
For details on the M8070B Startup Options dialog box, refer to
M8100 Series User Guide.
3Click OK.
Figure 24 shows the appearance of the M8070B software with
M8008A,M8198A selected as Startup Options.
Figure 25 shows the appearance of the M8070B software with
M8008A,M8199A selected as Startup Options.
Figure 26 shows the appearance of the M8070B software with
M8008A,M8199B selected as Startup Options.
To Next Page
Loading...
Need help?
General
