M8100 Series Arbitrary Waveform Generators Getting Started Guide 65
Basic Setup for M8100A 2
Step 16 - Powering off the Chassis and Modules (If Required)
Power off the chassis and module in the following sequence:
1 Power off the host computer. If you are using the Keysight AXIe
Embedded Controller module as the host computer, ensure that you
shut down the controller by executing the Windows shutdown process.
2 Power off the chassis by pressing the chassis ON/STANDBY switch on
the front panel of chassis. Do not use the circuit breaker for routine
power off. The module(s) are powered off automatically with the
chassis.
To Next Page
Loading...
Need help?
General
