56 M8100 Series Arbitrary Waveform Generators Getting Started Guide
2 Basic Setup for M8100A
Step 9 - Installing Keysight IO Libraries Suite (not required for M8100A-BU6)
IO Libraries Suite version 17.1 or later is required. Always use the latest
version of the Keysight IO Libraries.
1 Disconnect any devices connected to the host computer.
2 If open, close all applications on the host computer.
3 Download and install the IO Libraries from
www.keysight.com/find/iosuite.
4 Follow the instructions as prompted during the installation.
5 After installation, you will see the Keysight IO icon in the taskbar
notification area of the host computer screen.
Step 10 - Installing M8070B Software (not required for M8100A-BU6)
The M8070B software does not require any license for its installation.
However, it can only be used to perform some basic operations. For
advance operations, you need to install the driver packages in the M8070B
software. For details, go to Step 12 - Installing Module Driver Package in
the M8070B Software on page 58.
These driver packages need a valid license for their activation. For details,
go to Step 13 - Installing the Licenses on page 59.
To install the software
1 Download the latest M8070B software from
www.keysight.com/find/M8070B.
2 Double-click the setup (.exe) file.
The InstallShield Wizard is displayed.
Perform this step if you are setting up an M8100A-BU5 system or if the
host computer you are using along with the M8100 series modules
requires I/O library installation.
Perform this step if you are setting up an M8100A-BU5 system or if the
host computer you are using along with the M8100 series modules
requires I/O library installation.
To Next Page
Loading...
Need help?
General
