M8100 Series Arbitrary Waveform Generators Getting Started Guide 57
Basic Setup for M8100A 2
3If displayed, click Install to continue or click Next if the system
controller meets the minimum system configuration requirements
displayed by the wizard.
4 When displayed, accept the license agreement and click Next.
5Click Install to start the installation then follow any on-screen
prompts/instructions.
6 On your Windows OS, click Start > Keysight M8070B > Keysight
M8070B to verify software installation.
Step 11 - Starting the M8070B Software
1 Ensure that the system is powered up and ready to start as described
in the sections Basic Setup for M8100 on page 35.
2 On the host computer, click Start > Keysight M8070B > Keysight
M8070B.
3 Select the module options from M8070B Startup Options dialog box.
For details on the M8070B Startup Options dialog box, refer to M8100
Series User Guide. For information on SCPI command for remote
programming of one or more AWG modules in the M8100 series, refer
to the M8100 Series Programming Guide.
4Click OK. The startup screen of the M8070B software should display.
Verify your account permissions. Ensure that you have full administrative
privileges (Run as Administrator) before you install or upgrade the
M8070B software on a PC running Windows 10. Not doing so may result
in an installation failure. Contact your system administrator to provide
you the administrative rights.
To Next Page
Loading...
