358 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
22 Utility Settings
1 Press [Utility] > Quick Action > Action; then, select the action that should be
performed:
• Off — disables the [Quick Action] key.
• Quick Measure All — displays a popup containing a snapshot of all the single
waveform measurements. The Source softkey lets you select the waveform
source (which also becomes the source selection in the Measurement
Menu). See Chapter 15, “Measurements,” starting on page 243.
• Quick Measure Statistics Reset — resets all measurement statistics and the
measurement count. See “Measurement Statistics" on page 272.
• Quick Mask Statistics Reset — resets mask statistics and counters. See “Mask
Statistics" on page 280.
• Quick Print — prints the current screen image. Press Settings to set up the
printing options. See Chapter 21, “Print (Screens),” starting on page 335.
• Quick Save — saves the current image, waveform data, or setup. Press Settings
to set up the save options. See Chapter 20, “Save/Email/Recall (Setups,
Screens, Data),” starting on page 321.
• Quick Email — e-mails the current setup, screen image, or data file. Press
Settings to set up the e-mail options. See “Emailing Setups, Screen Images,
or Data" on page 330.
• Quick Recall — recalls a setup, mask, or reference waveform. Press Settings to
set up the recall options. See Chapter 20, “Save/Email/Recall (Setups,
Screens, Data),” starting on page 321.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un-freezes the display if currently frozen. For more
information, see “To freeze the display" on page 159.
• Quick Trigger Mode — toggles the trigger mode between Auto and Normal, see
“To select the Auto or Normal trigger mode" on page 208.
• Quick Clear Display — clears the display, see “To clear the display" on
page 158.
Once the [Quick Action] key is configured, you simply press it to perform the
selected action.
To Next Page
Loading...
