FETCh (FETCh commands only on N676xA, N678xA SMU, Option 054)
[:SCALar]
:CURRent
[:DC]? (@chanlist) Returns the averaged measurement.
:ACDC? (@chanlist) Returns the RMS measurement (AC + DC).
:HIGH? (@chanlist) Returns the High level of a pulse waveform.
:LOW? (@chanlist) Returns the Low level of a pulse waveform.
:MAXimum? (@chanlist) Returns the maximum value.
:MINimum? (@chanlist) Returns the minimum value.
:POWer
[:DC]? (@chanlist) Returns the averaged measurement. (N676xA, N678xA SMU)
:MAXimum? (@chanlist) Returns the maximum value.
:MINimum? (@chanlist) Returns the minimum value.
:VOLTage
[:DC]? (@chanlist) Returns the averaged measurement.
:ACDC? (@chanlist) Returns the RMS measurement (AC + DC).
:HIGH? (@chanlist) Returns the High level of a pulse waveform.
:LOW? (@chanlist) Returns the Low level of a pulse waveform.
:MAXimum? (@chanlist) Returns the maximum value.
:MINimum? (@chanlist) Returns the minimum value.
:ARRay
:CURRent
[:DC]? (@chanlist) Returns an array with the instantaneous measurement.
:POWer
[:DC]? (@chanlist) Returns an array with the instantaneous measurement. (N676xA, N678xA SMU)
:VOLTage
[:DC]? (@chanlist) Returns an array with the instantaneous measurement.
:ELOG? <value (@chanlist) Returns the most recent external datalog records.
FORMat
[:DATA] ASCII | REAL Specifies the format of the returned data.
:BORDer NORMal | SWAPped Specifies how binary data is transferred.
HCOPy
:SDUMp
:DATA? Returns an image of the front panel display.
:DATA
:FORMat BMP|GIF|PNG Specifies the format for front panel images returned.
IEEE 488.2 Common Commands
*CLS Clears status.
*ESE<value> Sets standard event status enable.
1 Quick Reference
28 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
