Keysight N6701C - Page 33

:END
[:LEVel] <value>, (@chanlist) Sets the end level of the staircase
:TIMe <value>, (@chanlist) Sets the length of the end time
:NSTeps <value>, (@chanlist) Sets the number of steps in the staircase
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the staircase
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TIMe <value>, (@chanlist) Sets the length of the staircase
:STEP
:END
:TIMe <value>, (@chanlist) Sets the end level of the step
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the step
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TRAPezoid
:END
:TIMe <value>, (@chanlist) Sets the length of the end time
:FTIMe <value>, (@chanlist) Sets the length of the fall time
:RTIMe <value>, (@chanlist) Sets the length of the rise time
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the trapezoid
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TOP
[:LEVel] <value>, (@chanlist) Sets the top level of the trapezoid
:TIMe <value>, (@chanlist) Sets the length of the top of the trapezoid
:UDEFined
:BOSTep
[:DATA] <Bool>{,<Bool>}, (@chanlist) Generate triggers at the Beginning Of STep
:POINts? (@chanlist) Returns the number of BOST points
:DWELl <value>, {<value>}, (@chanlist) Sets the user-defined dwell values
:POINts? (@chanlist) Returns the number of dwell points
:LEVel <value>, {<value>}, (@chanlist) Sets the user-defined level values
:POINts? (@chanlist) Returns the number of points
:FUNCtion <function>, (@chanlist) Selects the Arb function (for backward compatibility)
:SHAPe <shape>, (@chanlist) Selects the Arb function (replaces ARB:FUNCtion)
:TYPE CURRent|VOLTage|RESISTANCE, (@chanlist) Selects the Arb type (replaces ARB:FUNCtion)
:SEQuence
:COUNt <value>|INFinity, (@chanlist) Sets the number of times the sequence is repeated
:LENGth? (@chanlist) Returns the number of steps in the sequence
:QUALity? (@chanlist) Returns the quality of the waveforms in the sequence
:RESet (@chanlist) Resets the sequence to its power-on default setting
:STEP
:COUNt <value>|INFinity, <step#> (@chanlist) Sets the number of times the sequence step is repeated
:CURRent <function>, <step#> (@chanlist) Programs the steps in a current sequence
Keysight N6700C Operating and Service Guide 33
1 Quick Reference