Test Record Form - Keysight N6761A and N6762A
N6761A and N6762A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
Both
Both
Both
Both
+ 9 mV
Vout − 6 mV
49.986 V
Vout − 14 mV
_______
_______
_______
_______
+ 21 mV
Vout + 6 mV
50.014 V
Vout + 14 mV
Low Range Voltage Prog. & Readback
Low Voltage Vout:
Voltage measured over interface:
Both
Both
5.4976 V
Vout – 2.4 mV
_______
_______
5.5024 V
Vout + 2.4 mV
CV Load Effect: Both – 0.5 mV _______ + 0.5 mV
CV Source Effect: Both – 0.5 mV _______ + 0.5 mV
CV Ripple and Noise
peak-to-peak:
rms:
Both
Both
N/A
N/A
_______
_______
+ 4.5 mV
+ 0.35 mV
Transient response
Voltage @ 150 μs: Both – 75 mV _______ + 75 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
Both
Both
N6761A
N6762A
N6761A
N6762A
− 0.8 mA
Iout − 160 µA
1.4992 A
2.9986 A
Iout − 0.76 mA
Iout − 1.36 mA
_______
_______
_______
_______
_______
_______
+ 1.2 mA
Iout + 160 µA
1.5008 A
3.0014 A
Iout + 0.76 mA
Iout + 1.36 mA
Low Range Current Prog. & Readback
Low Current (full-scale) Iout:
Current measured over interface:
Both
Both
0.099930 A
Iout − 45 µA
_______
_______
0.100070 A
Iout + 45 µA
CC Load Effect: Both – 65 µA _______ + 65 µA
CC Source Effect: Both – 30 µA _______ + 30 µA
Test Description N6761A Setting N6762A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
Voltage Programming & Readback Low Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
Current Programming & Readback Low Current:
Current Readback 100 µACurrent:
Current Readback 200 µACurrent:
CC Load Effect, Source Effect:
15 mV, 1 A
50 V, 1 A
5.5 V 1 A
50 V, 1 A
33 V, from 0.9 A to 1.5 A
1 mA, 33 V
1.5 A, 33 V
0.1 A, 33 V
1 mA, 1.9 V
1 mA, 3.9 V
1.5 A, 33 V
15 mV, 2 A
50 V, 2 A
5,5 V, 2 A
50 V, 2 A
33 V, from 1.5 A to 3 A
1 mA, 33 V
3 A, 33 V
0.1 A, 33 V
1 mA, 1.9 V
1 mA, 3.9 V
3 A, 33 V
Keysight N6700C Operating and Service Guide 387
6 Verification and Calibration