Keysight N9000B - 3.7.3 Amplitude; 3.7.3.1 Y Scale

3 Spectrum Analyzer Mode
3.7 Burst Power Measurement
Name Corresponding Results Display
Format
Max Point
Power
n = 1 7
th
Maximum peak level of the most recently acquired trace data
99.99 dBm
Min Point
Power
n = 1 8
th
Minimum peak level of the most recently acquired trace data
99.99 dBm
Metrics window when Meas Method is Above Threshold
Metrics window when Meas Method is Burst Width
3.7.3 Amplitude
Activates the Amplitude menu and selects Reference Level or Reference Value as
the active function, depending on the measurement.
Some features in this menu apply to multiple measurements. Some other features
apply only to specific measurements and their controls are blanked or grayed-out in
measurements that do not support the feature.
3.7.3.1 Y Scale
Contains controls that pertain to the Y axis parameters of the measurement. These
parameters control how data on the vertical (Y) axis is displayed and control
instrument settings that affect the vertical axis.
Spectrum Analyzer Mode User's &Programmer's Reference 1241