Key Reference
Marker
120
Marker Trace
Auto 1 2 3 4
Places a marker on the selected trace, if no markers have
been previously turned on. If a marker is currently active,
press Marker Trace until 1, 2, 3, or 4 is underlined: the active
marker moves to the selected trace.
Selecting Auto mode moves the marker to the automatically
selected trace. The trace selection will search for the lowest
numbered trace in the following mode order: Clear-write,
Max-hold, Min-hold and View. If there are no traces in any of
these modes, it selects trace 1.
Key access:
> More
Marker Table Compresses the graticule and displays marker information in
a table. The information includes the marker number, trace
number, marker type, X axis value, and the amplitude.
Key access:
> More
Marker
On
Off
Activates/deactivates the marker table.
Key access:
> More > Maker Table
Prev Page
Next Page
displays the previous/next page of the marker
table.
Key access:
> More > Maker Table
Marker
Marker
Marker
To Next Page
Loading...
