Overview
Front Panel Overview
4
Front Panel Overview
1Screen 6.5 inch TFT color screen shows information of the
current function, including the signal traces, status
indicators, and instrument messages. Labels for softkeys are
located on the right- hand side of the screen.
2Softkeys are the unlabeled keys next to the screen. They
activate functions displayed to the left of each key.
3 Amplitude activates the reference level function and
accesses the amplitude softkeys, with which you set
functions that affect data on the vertical axis.
4SPAN sets the frequency range symmetrically about the
center frequency. The frequency- span readout describes the
total displayed frequency range.
5Frequency activates the center- frequency function, and
accesses the menu of frequency functions.
6 Function Keys relate directly to the following main functions:
• Preset/System (Local) accesses the softkeys to reset the
analyzer to a known state, if the analyzer is in the remote
mode, pressing this key returns the analyzer to the local
mode and enables front- panel control.
Local
Save
PROBE POW ER
RF IN 50
50VDC MAX
30dBm 1W MAX
TG SOURCE CAL OUT
50MHz 10 dBm
Rem ot e
Standby
On
7
·
4
1
0
2
5
9
6
3
Bac k
Frequ ency
SPAN
Marker
Peak
Search
Marker
Auto
Tune
Det/
Display
File/
Prin t
BW/
Avg
View/
Trace
MeasMODE
Prese t/
System
Amplit ude
Ent er
Sweep/
Trig
8
N9320B 9 kHz - 3.0 GHz
SPECTRUM ANALYZER
1
8
9
10
11
12
18
17
16
15
14
7
5
6
4
3
2
13
To Next Page
Loading...
