9
Overview
Rear Panel Overview
Rear Panel Overview
1 REF OUT connector provides a frequency of 10 MHz, amplitude
of –10 dBm reference output. (BNC female)
2REF IN connector accepts an external timebase with a
frequency of 10 MHz, amplitude of –5 to +10 dBm. (BNC
female)
3 Kensington Lock lock the instrument and keep its safety.
4LAN port A TCP/IP Interface that is used for remote
analyzer operation.
5 EXT TRG IN (TTL) connector accepts an external voltage input,
the positive edge of which triggers the analyzer sweep
function. (BNC female)
6Power switch isolates the analyzer from the AC line power.
After switch on, the analyzer enters into standby mode and
the orange standby LED on the front panel lights.
7AC Power Receptacle accepts a three- pin line power plug.
8 VGA connector provides the video output signal to an
external monitor or projector. (D- sub 15- pin female)
9 USB Host connector provides a connection between the
analyzer and an PC for remote control.
10 GPIB connector (Option G01) is an optional interface. GPIB
supports remote analyzer operation.
REF IN
REF OUT
TRIG IN
USB
LAN
VGA
OUT
T T L
~100-240
V
50-60
Hz
100
W MAX
SERI AL LABEL
ATTACH HERE
HIPOT LABEL
ATTACH HERE
10MHz
10MHz
GPIB
1
2
9
4
5
6
7
8
3
10
To Next Page
Loading...
