Keysight N9320B - AM;FM Modulation Analysis

Key Reference
MODE
146
AM/FM Modulation Analysis
Use the arrow keys to highlight the mode you need and
press [ENTER] as a terminator. When this mode is selected,
the AM/FM modulation analysis menu will be displayed.
Carrier Freq Sets the modulated carrier frequency.
Key access: > AM/FM Modulation Analysis
IFBW This specifies the IF bandwidth for the signal to be analyzed.
The measurement accuracy will be impacted if this value
isn’t set precisely.
Key access: > AM/FM Modulation Analysis
EqLPF This specifies the IF bandwidth for the signal to be analyzed.
The measurement accuracy will be impacted if this value
isn’t set precisely.
Key access: > AM/FM Modulation Analysis
Filter Setup Accesses the Filter setup submenu for further configuration.
Key access: > AM/FM Modulation Analysis
View Accesses the submenu to select four display mode:
Symbol - displays the binary symbol in full screen/window.
Waveform - displays the signal waveform.
MODE
MODE
MODE
Meas
Filter
Selects the Measure Filter as Root Nyquist,
Nyquist, and Gaussian.
Ref Filter Selects the Measure Filter as Root Nyquist,
Nyquist, and Gaussian.
Alpha/BbT Sets the root- off factor α for Root Nyquist and
Nyquist filter or BbT for Gaussian filter.
Filter
Symbols
Sets the symbol numbers for the selected filter.
The allowed value range is from 2 to 25.
MODE