25
Getting Started
Helpful Tips
Firmware Upgrade
Press > More > Show software to view the firmware
revision of your analyzer. If you call Keysight Technologies
regarding your analyzer, it is helpful to have this revision
and the analyzer serial number available.
Follow this procedure to finish the firmware update:
1 Download the firmware package from web. Extract and copy
the file version and folder “n9320b” into the root directory
of a USB stick.
2 Plug the USB stick into the connector. Press > Upgrade
The analyzer will perform the update process automatically.
The upgrade procedure will take several minutes. Once the
upgrade is completed, please follow the instruction to reboot
the instrument.
IO Configuration
The N9320B spectrum analyzer provides three types of IO
connnection: USB, LAN and optional GPIB interface. Press
> {IO Configure} to select the corresponding interface as
your need.
USB
Select USB to enable the USB connection for remote control.
LAN
The N9320B supports LAN port connection for remote
control. Press > {More} > {More} > {IP Admin} to set the
IP parameters for the network connection.
Preset/
System
Preset/
System
CAUTION
Any interruption during the update process will result in update failure
and system data lost. Do not remove the USB storage device until the
update is finished.
Preset/
System
Preset/
System
To Next Page
Loading...
