143
Key Reference
MODE
Power Meter
Use the arrow keys to highlight the mode and press [ENTER]
to make a measurement using the power meter function.
When this mode is selected, the power meter related softkey
menu will be displayed and many of the instrument
hardkeys will be disabled as they are not necessary for this
mode.
Key access:
Zero/Cal Accesses the associated Zeroing submenu.
Key access: > Power Meter
Meas Disp Accesses the Meas Disp submenu for defining the display
range and resolution while in Power Meter mode.
Key access: > Power Meter
MODE
Zero Makes a Zero operation of the power sensor.
The U2000 Series USB Power Sensors have their
sensor calibration tables stored in non- volatile
memory which means that the reference
calibration factor is automatically loaded upon
power- up.
Key access: > Power Meter > Zero/Cal
Zero Type Toggles the zeroing type of the Power Sensor
between internal and external. When this type is
set to EXT, pressing Zero will bring up a message
which indicates the external signal need be pulled
out. This setting is not affected by the preset in
Power Meter menu.
Key access: > Power Meter > Zero/Cal
MODE
MODE
MODE
MODE
To Next Page
Loading...
