Key Reference
MODE
144
Meas Setup Accesses the power meter measurement setup submenu.
Key access: > Power Meter
Disp
Range
Accesses the associated Disp Range submenu.
Key access: > Power Meter > Meas Disp
Auto
Range
Toggles the auto range function between
On and Off. When the Auto Range is set
to On, the Top and Bottom value of the
power meter’s display range will be set
automatically according to the
measurement data:
Top = Max. data + 0.5
Bottom = Min. data - 0.5
The default setting is Off.
Top Sets the top value of the power meter’
display range.
Range from (Bottom + 0.01) to 200 dBm.
The default value is 20 dBm.
Bottom Sets the bottom value of the power meter’
display range.
Range from - 200 to (Top - 0.01) dBm.
The default value is - 70 dBm.
Resolution
1 2 3 4
Accesses the associated Resolution submenu.
When the measurement suffix is W or %, this
parameter represents the number of significant
digits. When the measurement suffix is dB or dBm,
1 through 4 represents 1, 0.1, 0.01, and 0.001 dB
respectively. The default value is 3.
Key access: > Power Meter
MODE
MODE
MODE
To Next Page
Loading...
