5
Overview
Front Panel Overview
• Auto Tune searches the signal automatically and locates
the signal to the center of the graticule. see “Auto Tune” on
page 94.
• BW/Avg activates the resolution bandwidth function and
accesses the softkeys that control the bandwidth functions
and averaging.
• Sweep/Trig accesses the softkeys that allow you to set the
sweep time, select the sweep mode and trigger mode of
the analyzer.
• View/Trace accesses the softkeys that allow you to store
and manipulate trace information.
• Det/Display accesses the softkeys that allow you to
configure detector functions and control what is displayed
on the analyzer, including the display line, graticule and
annotation, as well as the testing of trace data against
entered limits.
• MODE selects the measurement mode of your analyzer.
• Meas accesses the softkeys that let you make transmitter
power measurements such as adjacent channel power,
occupied bandwidth, and harmonic distortion, etc.
• Marker accesses the marker control keys that select the
type and number of markers and turns them on and off.
• Marker accesses the marker function softkeys that help
you with the measurement.
• Peak Search places a marker on the highest peak.
• File/Print accesses the softkeys that allow you to
configure the file and printing system of the analyzer.
7 Arrow Keys The up and down arrow keys shift the selected
item when you press [MODE] hardkey; you can also change
the mode by rotating the knob.
8 Knob The front panel knob increases or decreases a value, a
numeric digit, or scrolls up and down to select an item in a
list.
To Next Page
Loading...
