163
Key Reference
Preset/System
GPIB Address Sets the GPIB address for the anlayzer.
Key access: > More > More
VGA OUTPUT Toggles the VGA output port between on and off for video
signal output.
Key access: > More > More
Brightness Adjusts the display brightness between high, middle and low.
Key access: > More > More
IP Admin Access the submenu to configure the TCP/IP parameters for
remote control via LAN, such as: IP address, Static/DHCP IP,
Gateway and subnet mask. Once the setting is finished, press
Apply to activate the configuration.
Key access: > More > More
N9320A Code
Compatibility
When this softkey is set to On, the analyzer is compatible
with the N9320A SCPI command library.
Key access: > More > More
Activate
License
Activates the license for the option whose
number was previously input in License Key. If the
entry is correct, the option will be enabled and
the message: “Option activated” will appear in the
status line of your display.
If the entry is incorrect, the error message
“License key invalid” appears in the status line of
the display. Edit the option and/or license key
number until they are correct.
Preset/
System
Preset/
System
Preset/
System
Preset/
System
Preset/
System
To Next Page
Loading...
