33
Functions and Measurements
Measuring Multiple Signals
6 Move the second marker to another signal peak using the
front- panel knob or by using Peak Search.
Press > Next Peak or
Press > Next Pk Right or Next Pk Left. Continue pressing
the Next Pk softkeys until the marker is on the correct signal
peak.
The amplitude and frequency differences between the
markers are displayed in the active function block.
Figure 3-2 Delta pair marker with signals on the same screen
Peak
Search
Peak
Search
NOTE
To increase the resolution of the marker readings, turn on the
frequency count function. For more information, refer to
“Improving
Frequency Resolution and Accuracy” on page 46
.
To Next Page
Loading...
