Keysight PNA Series User Manual

Banded Solution Conguration
Single channel receive modules (OML Inc.)
Waveguide ange Frequency GHz Standard single channel receive
modules
Single channel receive modules with 15 dB LO
amplier
WR15 50 - 75 N5257AR15 - STD N5257AR15 - 001
WR12 60 - 90 N5257AR12 - STD N5257AR12 - 001
WR10 75 - 110 N5257AR10 - STD N5257AR10 - 001
WR08 90 - 140 N5257AR08 - STD N5257AR08 - 001
WR06 110 - 170 N5257AR06 - STD N5257AR06 - 001
WR05 140 - 220 N5257AR05 - STD N5257AR05 - 001
WR03 220 - 325 N5257AR03 - STD N5257AR03 - 001
WR02.2 325 - 500 N5257AR02 - STD Available on request
Cables for OML Inc. banded millimeter-wave modules - direct connect only
Model number Description
N5260AK48 4 ft cables (RF, LO, IF,Bias + adapters) for direct connect mm-head TxRx to N5224A, N5225A, N5227A, or N5244A, N5245A,
N5247A
N5260AK50 4 ft cables (RF, LO, IF,Bias) to direct connect mm-head T/R to N5222A or N5242A
N5260AK51 4 ft cables (LO, IF, Bias) to direct connect mm-head Rec. only to N5222A or N5242A
Note
When conguring an OML Inc. frequency extender for direct connect please include a 12 V, 1.3 A power supply (e.g. Keysight U8001A). Re-
quires one power supply per extender being used for direct connection.
Cables for test set controlled OML frequency extenders
Choose one of the following cable options per module to be connected to controller.
N5261A Based OML Solution
Cable option Description
N5261A-501 A single set (1-port) of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 48”
N5261A-502 A single set (1-port) of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 2 meters
N5261A-503 A single set (1-port) of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 3 meters
N5261A-505 A single set (1-port) of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 5 meters
N5262A Based OML Solution
Cable option Description
N5262A-501 A single set of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 48"
N5262A-502 A single set of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 2 meters
N5262A-503 A single set of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 3 meters
N5262A-505 A single set of RF,LO,DC and IF cables for connection to a single T/R millimeter module, 5 meters
Dual channel receive modules (OML Inc.)
Waveguide ange Frequency GHz Standard dual channel receive
module
Dual channel receive module with 15 dB LO
amplier
WR15 50 - 75 N5258AD15 - STD N5258AD15 - 001
WR12 60 - 90 N5258AD12 - STD N5258AD12 - 001
WR10 75 - 110 N5258AD10 - STD N5258AD10 - 001
WR08 90 - 140 N5258AD08 - STD N5258AD08 - 001
WR06 110 - 170 N5258AD06 - STD N5258AD06 - 001
WR05 140 - 220 N5258AD05 - STD N5258AD05 - 001
WR03 220 - 325 N5258AD03 - STD N5258AD03 - 001
Note: Other special option cables are also available on request.
17 | Keysight | Antenna Test – Selection Guide

Keysight PNA Series Specifications

General

Number of Ports	2, 4
Impedance	50 Ω
Output Power Range	-55 dBm to +13 dBm (varies by model)
Dimensions	Varies by model
Weight	Varies by model
Power Requirements	100-240 VAC, 50/60 Hz
Storage Temperature	-40°C to 70°C