Keysight PNA Series User Manual

The Select Sources dialog box will appear.
This shows all sources that were previously added.
b) Select Congure if a new source needs to be added.
The External Source Conguration dialogue box will appear.
c) Select Add to add another source.
d) From the Modify Source dialogue box:
i) Type in source name.
ii) Select source type from drop-down menu.
iii) Select OK.
80 | Keysight | Antenna Test – Selection Guide

Keysight PNA Series Specifications

General

Number of Ports	2, 4
Impedance	50 Ω
Output Power Range	-55 dBm to +13 dBm (varies by model)
Dimensions	Varies by model
Weight	Varies by model
Power Requirements	100-240 VAC, 50/60 Hz
Storage Temperature	-40°C to 70°C