36 Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide
2 Getting Started
Inserting LC fiber connectors to SFP28 module
After inserting the MTP connector into the QSFP28 module, let us insert
the other end of the cable (LC fibers) into an SFP28 25GBASE-SR module.
Note that the Lane 1 is inserted into the module.
Figure 24 shows how to insert the LC fibers into the SFP28 module. Notice
that the clip on the fiber must face the lower end of the SFP28 module.
Figure 24 Inserting Lane 1 of the LC fiber to the SFP28 module
When inserted properly, the cable fits in with a ‘click’.
To Next Page
Loading...