Keysight u2722a - Figure 2-3 Turning on the U2722 A;U2723 A; Figure 2-4 Turning off the U2722 A;U2723 A

Operation and Features 2
Keysight U2722A/U2723A User’s Guide 37
Click Output to enable the output as shown in Figure 2-3. The button will turn
green. Clicking Output again disables the output and the button will turn to
gray.
Figure 2-3 Turning on the U2722A/U2723A
Figure 2-4 Turning off the U2722A/U2723A
In source voltage mode, the U2722A/U2723A will maintain a constant output
voltage based on the set value. The output current will vary according to the
load. The input protection current settings represents the limit value.
3 Adjust the slider for the desired output voltage.
Adjust the slider or key in the desired output voltage value at the Drive
Voltage text box.
4 Real time display of measured voltage and current.
The application display panel will show the real time values of both the voltage
and current.