Keysight u2722a - Parallel Connections; Figure 2-14 U2722 A;U2723 A Outputs Connected in Parallel

2 Operation and Features
54 Keysight U2722A/U2723A User’s Guide
Parallel connections
A parallel connection is used to increase the output current. Connect two or more
of the outputs in parallel as in Figure 2-14. For a parallel connection, the output
current is the sum of the currents of the individual output. The voltage is from any
of the outputs. Each of the individual outputs must be adjusted to obtain the total
output current.
Figure 2-14 U2722A/U2723A outputs connected in parallel
Positive (+) terminal of the device-under-test
Negative (–) terminal of the device-under-test
Output 2 Output 3
SENSE OUTPUT GUARD OUTPUT SENSE SENSE OUTPUT GUARD OUTPUT SENSE SENSE OUTPUT GUARD OUTPUT SENSE
+
Output 1
+++++-- -- --
NOTE
– Ensure that the voltage (when source current) or the current (when source
voltage) is not clamped.
– Preferably, both are at the same voltage range.