Keysight u2722a - Memory List Commands Execution State; Figure 2-15 Channel State and Status Operation Condition Register Bit for External Trigger; Figure 2-16 Channel State and Status Operation Condition Register Bit for Remote Trigger

2 Operation and Features
62 Keysight U2722A/U2723A User’s Guide
Memory list commands execution state
Figure 2-15 and Figure 2-16 shows the states that a channel goes through when
executing commands from the memory list using the external trigger or remote
trigger command, and the status operation condition register bit that is involved.
The WTG bit set indicates that the channel is armed and waiting for trigger. The
DTG bit set indicates that the channel is busy and will ignore all incoming
commands.
Figure 2-15 Channel state and Status Operation Condition register bit for
external trigger
Figure 2-16 Channel state and Status Operation Condition register bit for
remote trigger
Idle State
HW Arm State
Executing Job State
WTG = 0
DTG = 0
WTG = 1
DTG = 0
WTG = 0
DTG = 1
Idle State
Executing Job State
WTG = 0
DTG = 0
WTG = 0
DTG = 1