Keysight u2722a - Environmental Conditions; Operating Requirements and Compliance

Keysight U2722A/U2723A User’s Guide 7
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation.
The table below shows the general environmental requirements for this
instrument.
Environmental conditions Requirements
Operating temperature 0 °C to 50 °C
Operating humidity 20% to 85% RH non-condensing
Storage temperature –20 °C to 70 °C
Storage humidity 5% to 90% RH non-condensing
NOTE
The U2722A/U2723A USB Modular Source Measure Units complies with the
following safety and EMC requirements:
– IEC 61326-1:2005/EN61326-1:2006
– Canada: ICES-001:2004
– Australia/New Zealand: AS/NZS CISPR11:2004
– IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition)
– Canada: CAN/CSA-C22.2 No. 61010-1-04
– USA: ANSI/UL 61010-1:2004