4 System Related Operation
Using the Utility Menu
110 U3606A User’s and Service Guide
Editing values
Some items in the utility menu allows you to select your desired value by
decreasing or increasing a digit. Press or to define the setting. The
digit currently being edited will flash.
Use these keys to position the cursor on a digit:
When the cursor is positioned on a digit, use these keys to edit the value:
When you are done editing, save the new value by pressing Shift > Save.
(Or press Shift > Exit to exit the edit mode without saving.)
Key Description
Press to move the cursor to the left.
Press to move the cursor to the right.
Key Description
Press to increment the digit.
Press to decrement the digit.
Digit currently being edited
To Next Page
Loading...
