Keysight U3606A - Table 8-10 Scan Output Specifications

8 Characteristics and Specifications
DC Power Supply Specifications
260 U3606A User’s and Service Guide
Sweep specifications
Table 8 - 10 Scan output specifications
Scan Constant voltage Constant current
RangeS1S2S1S2
Amplitude
[1]
[1] Amplitude start position is fixed at 0 (V or A) by default.
0 V to 31.500 V 0 V to 8.4000 V 0 A to 1.0500 A 0 A to 3.1500 A
Step 1 step to 100 steps 1 step to 100 steps
Dwelling time 1 s to 99 s 1 s to 99 s
Table 8 - 11 Ramp output specifications
Ramp Constant voltage Constant current
RangeS1S2S1S2
Amplitude
[1]
[1] Amplitude start position is fixed at 0 (V or A) by default.
0 V to 31.500 V 0 V to 8.4000 V 0 A to 1.0500 A 0 A to 3.1500 A
Step 1 step to 10000 steps 1 step to 10000 steps
Dwelling time 300 ms (typical) per step 300 ms (typical) per step