Keysight U3606A - U3606 A Users and Service Guide

Getting Started 1
Product at a Glance
U3606A User’s and Service Guide 13
Store Store instrument state selected
Recall Recall instrument state selected
Ramp Ramp signal output selected
Scan Scan signal output selected
Error One or more errors available in the error queue
Rmt Remote interface control is active
OV Overvoltage condition active
OC Overcurrent condition active
OUT
Output is enabled from the output (+ FORCE –) terminals and remote sense
(rear output) terminals
SBY Output is on standby (disabled)
ms Pulse width unit for square-wave output
% Duty cycle unit for square-wave output
V Voltage unit: V for overvoltage protection
A Current unit: A for overcurrent protection
Table 1 - 1 U3606A display annunciators (continued)
Annunciator Description