Keysight U3606A - Table 8-9 Square-Wave Output Specifications

8 Characteristics and Specifications
DC Power Supply Specifications
258 U3606A User’s and Service Guide
Square-wave output specifications
Remote sensing capability: Output can maintain specifications for
• Range S1 (30 V/1 A): Up to a 0.75-volt drop per load lead.
• Range S2 (8 V/3 A): Up to a 0.5-volt drop per load lead.
Voltage programming speed:
(excludes command
processing time)
Full load
• Up: 300 ms
• Down: 400 ms
No load
• Up: 300 ms
• Down: 400 ms
Table 8 - 9 Square-wave output specifications
Parameter Specifications
Amplitude accuracy
± (offset)
Range S1 0.2 V
Range S2 0.2 V
Amplitude resolution
Range S1 1 mV
Range S2 1 mV
Frequency accuracy
± (% of frequency setting + offset)
Range
(27 steps
[1]
)
0.005% + 1 count
Frequency resolution 0.01 Hz
Duty cycle accuracy
± (% of duty cycle setting)
Range
(256 steps :
0.39% to 99.60%)
0.4%
[2][3]
Duty cycle resolution 0.39%
[3]
Pulse width accuracy
[3][4]
± (offset)
Range
(256 steps:
1/frequency)
Duty cycle/frequency
Pulse width resolution Range/256
[1] Available frequencies: 0.5, 2, 5, 6, 10, 15, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, 240, 300, 400, 480, 600, 800, 1200, 1600,
2400, 4800 (Hz)