Kia Sonet 2024 - 僅 Headlight Levelling Device; 僅 Operating Front Fog Light

Features of your vehicle
644
Lighting
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
The lever will return to the OFF posi
-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
selecting "User Settings →Lights → One
Touch Turn signal".
NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is poor
due to fog, rain or snow, etc.
The fog lights will turn on when the fog
light switch (1) is turned to the on posi
-
tion after the headlight is turned on.
The fog light switch will return to its nor
-
mal position when released. To turn off
the fog light turn the fog light switch (1)
to ON position again.
To turn off the fog lights:
僅 Turn the fog light switch (1) to the ON
position.
CAUTION
When in operation, the fog lights con -
sume large amounts of vehicle electrical
power. Only use the fog lights when visi
-
bility is poor.
Headlight levelling device
To adjust the headlight beam level
according to the number of the passen
-
gers and loading weight in the luggage
area, turn the beam levelling switch.
The higher the number of the switch
position, the lower the headlight beam
level. Always keep the headlight beam at
the proper levelling position, or head
-
lights may dazzle other road users.
Listed below are the examples of proper
switch settings. For loading conditions
other than those listed below, adjust the
switch position so that the beam level
may be the nearest as the condition
obtained according to the list.
OQYi033094
OQYi033095