23
4
4
Features of your vehicle Bonnet
Bonnet
The bonnet serves as a cover for the
engine compartment.
Open the bonnet if maintenance works
needs to be performed in the engine
compartment or if you need to look at
the compartment.
Opening the bonnet
1. Pull the release lever to unlatch the
bonnet. The bonnet should pop open
slightly.
Open the bonnet after turning off the
engine on a flat surface, shifting the shift
lever to the P (Park) position for Auto
-
matic Transmission/Dual Clutch Trans
-
mission and to the 1st (First) gear or R
(Reverse) for Manual Transmission, and
setting the parking brake.
2. Go to the front of the vehicle, raise the
bonnet slightly, push the secondary
hood release lever (1) left and lift the
bonnet (2).
3. Pull out the support rod.
4. Hold the bonnet opened with the sup
-
port rod.
Bonnet open warning
The bonnet warning message will
appear on the LCD display when bonnet
is open.
The warning chime will operate when
the vehicle is being driven at or above 3
km/h (2 mph) with the bonnet open.
Closing the bonnet
1. Before closing the bonnet, check the
following:
僅 All filler caps in the engine com
-
partment must be correctly
installed.
僅 Gloves, rags or any other combusti
-
ble material must be removed from
the engine compartment.
2. Lower the bonnet until it is about 30
cm above the closed position and let it
To Next Page
Loading...
