Features of your vehicle
1004
Infotainment system
receiving AM and FM broadcast sig
-
nals.
僅 Prevent chemicals such as perfume,
cosmetic oil, sun cream, hand cleaner,
and air freshener from contacting the
interior parts because they may cause
damage or discoloration.
USB port
You can use an USB cable to connect
audio devices to the vehicle USB port.
When using a portable audio device con
-
nected to the power outlet, noise may
occur during playback. If this happens,
use the power source of the portable
audio device.
How vehicle radio works
FM reception
AM and FM radio signals are broadcast
from transmitter towers located around
your city. They are intercepted by the
radio antenna on your vehicle. This sig
-
nal is then processed by the radio and
sent to your vehicle speakers.
However, in some cases the signal com
-
ing to your vehicle may not be strong
and clear.
This can be due to factors, such as the
distance from the radio station, close
-
ness of other strong radio stations or the
presence of buildings, bridges or other
large obstructions in the area.
AM reception
AM broadcasts can be received at
greater distances than FM broadcasts.
This is because AM radio waves are
transmitted at low frequencies. These
long distance, low frequency radio
waves can follow the curvature of the
earth rather than travelling straight. In
addition, they curve around obstructions
resulting in better signal coverage.
To Next Page
Loading...
