Safety features of your vehicle
103
Seat
1. Put the headrest poles (2) into the
holes whilst pressing the release but
-
ton (1).
2. Recline the seatback (4) with the
recline lever (3).
3. Adjust the headrest to the appropriate
height.
Always make sure the headrest locks
into position after reinstalling and
adjusting it properly.
Seatback pocket (if equipped)
The seatback pocket is provided on the
back of the front passenger's and
driver's seatback.
Type A
Type B
Seatback pockets
Do not put heavy or sharp objects in the
seatback pockets. In an accident they
could come loose from the pocket and
injure vehicle occupants.
Rear seat adjustment
Folding the rear seat
The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
The purpose of the fold-down rear seat
-
backs is to allow you to carry longer
objects that could not be accommo
-
dated in the cargo area.
Never allow passengers to sit on top of
the folded down seatback whilst the
vehicle is moving. This is not a proper
seating position and no seat belts are
available for use. This could result in
serious injury or death in case of an acci
-
dent or sudden stop. Objects carried on
the folded down seatback should not
extend higher than the top of the front
seatbacks. This could allow cargo to
slide forward and cause injury or dam
-
age during sudden stops.
Folding down the rear seatback
1. Insert the rear seat belt buckle in the
pocket between the rear seatback
and cushion.
To Next Page
Loading...
