19
6
6
Driver assistance system Manual Speed Limit Assist (MSLA)
Resuming Manual Speed Limit
Assist
To resume Manual Speed Limit Assist
after the function was paused, operate
the (+), (-), ( ) switch.
If you push the (+) switch up or (–)
switch down, vehicle speed will be set to
the current speed on the cluster.
If you press the ( ) switch, vehicle
speed will resume to the preset speed.
Turning off Manual Speed Limit
Assist
Press the Driving Assist ( ) button to
turn Manual Speed Limit Assist off. The
Speed Limit ( ) indicator will go
off.
Take the following precautions when
using Manual Speed Limit Assist:
僅 Always set the vehicle speed under
the speed limit in your country.
僅 Keep Manual Speed Limit Assist off
when the function is not in use, to
avoid inadvertently setting a speed.
Check that the Speed Limit ( )
indicator is off.
僅 Manual Speed Limit Assist does not
substitute for proper and safe driving.
It is the responsibility of the driver to
always drive safely and should always
be aware of unexpected and sudden
situations from occurring. Pay atten
-
tion to the road conditions at all times.
To Next Page
Loading...
