57
8
8
Maintenance Light bulbs
inside and the outside of the lamp and
does not mean a problem with its func
-
tions. The moisture inside the lamp
would disappear if you drive the vehicle
with the headlamp turned on, however,
the level at which the moisture is
removed may differ depending on the
size/location/condition of the lamp. If the
moisture continues to stay inside the
lamp, have the vehicle checked by a
professional workshop. Kia recommends
to visit an authorised Kia dealer/service
partner.
If you don't have the necessary tools, the
correct bulbs and the expertise, consult
a professional workshop. Kia recom
-
mends to visit an authorised Kia dealer/
service partner. In many cases, it is diffi
-
cult to replace vehicle light bulbs
because other parts of the vehicle must
be removed before you can get to the
bulb. This is especially true if you have to
remove the headlamp assembly to get
to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to the
vehicle. Use only Kia Genuine Parts or
those of an equivalent standard part. If
not, it may lead to blowing a fuse or
other wiring damages.
Do not install extra lamps or LEDs to the
vehicle. If additional lights are installed, it
may lead to lamp malfunctions and flick
-
ering. Additionally, the fuse box and
other wiring may be damaged.
Light bulb position (Front)
Headlamp - Type A
Headlamp - Type B
Fog lamp - Type A
Fog lamp - Type B
1. Headlamp (High) (Bulb type)
2. Headlamp (Low) (Bulb type)
3. Turn signal lamp (Bulb type)
4. Headlamp (High) (LED type)
5. Headlamp (Low) (LED type)
6. Position lamp/Daytime running lamp
(LED type)
7. Turn signal lamp (LED type)
8. Front fog lamp (LED type)
To Next Page
Loading...
