Kidde VS4 User Manual

Chapter 3: System operation
144 P/N 3102351-EN • REV 005 • ISS 28DEC18
ID
Event description
069
Self test fault: A fault was detected while
testing the panel’s internal subsystems
(memory, flash, code, etc.)
070
Internal fault: The control panel detected an
internal hardware or software error
071
Dialer dsbl/rem disc: The dialer was
disabled by the Remote Disconnect button
072
Dialer line 1 fault: A ground fault or
line fault
was detected on line 1 of the dialer
073
Dialer line 2 fault: A ground fault or line fault
was detected on line 2 of the dialer
074
Dialer delivery fail: The dialer failed to
deliver a message to the receiver or CMS
075
Dialer normal test: A dialer test was
conducted when the panel was in a normal
state
076
Dialer abnormal test: A dialer test was
conducted when the panel was in an off-
normal state
077
Dialer configuration: The dialer is not
programmed or has unverified changes
078
Net Comm Fault 01: Communications
between the panel and network receiver 01
failed
079
Net Comm Fault 02: Communications
between the panel and network receiver 02
failed
080
Net Comm Fault 03: Communications
between the panel and network receiver 03
failed
081
Net Comm Fault 04: Communications
between the panel and network receiver 04
failed
082
Net Comm Fault 05: Communications
between the panel and network receiver 05
failed
083
Net Comm Fault 06: Communications
between the panel and network receiver 06
failed
084
Net Comm Fault 07: Communications
between the panel and network receiver 07
failed
ID
Event description
085
Net Comm Fault 08: Communications
between the panel and network receiver 08
failed
086
Net Conf Fault 01: The panel failed to
communicate with the network receiver 01
after a configuration change
087
Net Conf Fault 02: The panel failed to
communicate with the network receiver 02
after a configuration change
088
Net Conf Fault 03: The panel failed to
communicate with network receiver 03 a
fter
a configuration change
089
Net Conf Fault 04: The panel failed to
communicate with network receiver 04 after
a configuration change
090
Net Conf Fault 05: The panel failed to
communicate with network receiver 05 after
a configuration change
091
Net Conf Fault 06: The panel failed to
communicate with network receiver 06 after
a configuration change
092
Net Conf Fault 07: The panel failed to
communicate with network receiver 07 after
a configuration change
093
Net Conf Fault 08: The panel failed to
communicate with network receiver 08 after
a configuration change
094
IPGateway Trouble: IP Gateway
configuration is invalid
095
Fw Dwnld in Progress: Firmware update is
successfully initiated from the panel and
firmware update utility
096
Fw Download Aborted: Firmware update is
aborted due to connectivity loss (or) user
has aborted download from either panel or
update utility
097
Fw Download Failed: Firmware update
failed to store the Image.bin into panel flash
memory
098
Fw Download Completd: Firmware update
is successfully completed
099
NAC 1 trouble: An open or short was
detected on NAC 1 or there is a problem
with the EOL

Kidde VS4 Specifications

General

Brand	Kidde
Model	VS4
Category	Fire Alarms
Language	English