14 Installation and Preparations for Use TOS8030
Chapter 2 Installation and Preparations for Use
Describes how to unpack the tester for preparation before use.
2.1 Unpacking Inspection
Check the TOS8030 tester upon receipt for any damage that may have occurred dur-
ing transit and to confirm that all accessories have been provided.
If the product is damaged or if any accessories are missing, notify your Kikusui dis-
tributor or agent.
Fig.2-1 Accessories
• We recommend retaining all packing materials in case the product needs to be
transported at a later date.
High-voltage test leads, 1 set
TL01-TOS, 1.5 m
Power cord, 1
[Z1-AB0-072]
Operation Manual, 1 copy
INTERLOCK terminal jumper, 1
or or
Plug: NEMA5-15
Rating: 125V/10A
[85-AA-0003]
Plug: CEE7/7
Rating: 250V/10A
[85-AA-0005]
Plug: GB1002
Rating: 250V/10A
[85-10-0790]
The power cord that is provided varies depending on
the destination for the product at the factory-shipment.
NOTE
To Next Page
Loading...
