4 Safety Precautions TOS8030
Safety Precautions
The following safety precautions are intended to avoid fire hazard, electrical
shock, and other accidents or failures. Use of the product in a method not spec-
ified in this manual may impair the effectiveness of built-in protective functions.
User
s
• This product must be used only by qualified personnel who understand the con-
tents of this Operation Manual.
• If this product is handled by unqualified personnel, personal injury may result.
Ensure that the product is handled under the supervision of qualified personnel
(i.e., those experienced in electrical applications).
Purposes of use
• Do not use the product for any purpose other than those specified.
• This product is not designed or manufactured for home use or for general consumers.
Input po
wer
• Always connect the product to a power supply in line with the product’s input rating.
• Use the provided power cord to supply input power.
• This product is designed as equipment falling under Overvoltage Category II of the
IEC Standards (energy-consuming equipment to be supplied from fixed installation).
Co
ver
• Components inside the instrument may present physical hazards. Do not remove
the external cover.
Gr
ounding
• The product is equipment falling under Safety Class I of the IEC Standards (equip-
ment with a protective conductor terminal). Always ground the product’s protective
conductor terminal to prevent electric shock.
Installation
• This product is designed for indoor use. Only use it indoors.
• When installing products be sure to observe “2.2 Precautions for Installation”
described in this manual.
To Next Page
Loading...
