Kikusui TOS8030 - Hazardous Operations; To the Supervisor in Charge of Operation

2 TOS8030
To the Supervisor in Charge of Operation
• If the operator does not read the language used in this manual, translate the manual into
the appropriate language.
• Help the operator in understanding this manual before operation.
• Keep this manual near the instrument for easy access by the operator.
Hazardous Operations
Any of the following operations will result in electric shock, which may lead to serious
injury or death.
• Touching the output terminal while output is being generated.
• Touching a test lead connected to the output terminal while output is being generated.
• Touching the DUT while output is being generated.
• Touching a part electrically connected to the output terminal while output is being gener
-
ated.
Any of the following actions may result in electric shock leading to serious injury or
death.
• Operating the tester without connecting the grounding wire to ground.
• Operating the tester without wearing rubber gloves intended for electrical work.
• Approaching a section electrically connected to the output terminal while output is being
generated.