Kimo C310 User Manual

Table of contents
1. Introduction..........................................................................................................................................5
1.1. Description of the transmitter.......................................................................................................5
1.2. Description of the keys.................................................................................................................5
1.3. Protection tips of the sensor........................................................................................................6
2. Modbus................................................................................................................................................7
2.1. Configuration of parameters........................................................................................................7
2.2. Functions......................................................................................................................................7
2.3. Access code to register................................................................................................................7
3. Configure the transmitter...................................................................................................................10
3.1. Enter the security code..............................................................................................................10
3.2. Set the parameters of the transmitter........................................................................................10
3.2.1 Set the screen......................................................................................................................11
3.2.2 Set the graphical period.......................................................................................................11
3.2.3 Set the language..................................................................................................................11
3.2.4 Set date and time.................................................................................................................11
3.2.5 Activate /deactivate the beep key........................................................................................11
3.2.6 Lock and unlock the keyboard.............................................................................................11
3.2.7 Modify the security code......................................................................................................12
3.2.8 Back to factory parameters..................................................................................................12
3.2.9 Set the Modbus (optional)...................................................................................................12
3.2.10 Set the Ethernet communication (optional).......................................................................12
3.2.11 Access to the transmitter information................................................................................13
3.3. Configure the measurement channels.......................................................................................13
3.4. Configure the analogue outputs.................................................................................................13
3.4.1 Select the type of output......................................................................................................13
3.4.2 Set the minimum and maximum ranges..............................................................................14
3.4.3 Perform an output diagnostic...............................................................................................14
3.5. Configure the alarms..................................................................................................................15
3.5.1 Select the alarm mode.........................................................................................................15
3.5.2 Set the alarm in rising or falling edge..................................................................................16
3.5.3 Configure the alarm in monitoring mode.............................................................................16
3.5.4 Configure the alarm on Transmitter state mode..................................................................16
3.5.5 Configure the relays (optional)............................................................................................17
3.6. Configure the probes, boards and normative values.................................................................18
3.6.1 Configure an air velocity and airflow probe.........................................................................18
3.6.2 Configure a CO2 probe or a temperature/hygrometry probe..............................................19
3.6.3 Configure a board................................................................................................................19
3.7. Activate an option.......................................................................................................................22
4. Description of function and Modbus connections.............................................................................24
4.1. Device........................................................................................................................................24
4.2. Channels....................................................................................................................................24
4.3. Outputs.......................................................................................................................................25
4.4. Alarms........................................................................................................................................26
4.5. Measurement parameters..........................................................................................................26

Kimo C310 Specifications

General

Measured parameters	CO, Temperature
CO measurement range	0 to 500 ppm
CO resolution	1 ppm
Temperature accuracy	±0.5 °C
Temperature resolution	0.1 °C
Protection	IP65
Operating Humidity	0 to 95% RH (non-condensing)
Response Time	< 30 seconds
Power supply	24 V AC/DC
Output	4-20 mA