Kinco MK043E-20DT - 1.2 Environmental Conditions and Specifications

Kinco-MK
User Manual
4
MK043
MK043E-20DT
DC24V，DI 9*DC24V，DO 9*DC24V，2*AI (only support voltage
type),USB2.0 Programming port (PLC&HMI sharing same
programming port) PLC part 2*RS485 COM port, Supports up to
8 Kinco KS series expansion modules. HMI part provides Ethernet
interface, supports access to external network or other Ethernet
devices.
1.3 Environmental Condition
Kinco MK series accords with GB/T 15969.3-2007（idt IEC61131-2：2007）standard and test
specifications.
The following table lists the conditions and requirements for MK series to work properly. It is
the user's responsibility to ensure that the service conditions are not exceeded.
Transport and storage
Ambient
conditions
temperature
-10℃～+60℃
relative
humidity
10%~95%, no condensation
Altitude
Up to 3000 m
Mechanical
conditions
Free falls
within manufacturer's original packaging, 5 falls from 1m
of height.
Normal Operation
Ambient
conditions
air
temperature
Open equipment : -10 --- +55°C; Enclosed equipment: 0～
50℃
relative
humidity
10%~95%, no condensation
Altitude
Up to 2000 m
Pollution
degree
for use in pollution degree 2.
Mechanical
conditions
Sinusoidal
vibrations
5<f<8.4Hz, Occasional: 3.5mm amplitude; Continuous:
1.75mm amplitude.
8.4<f<150, Occasional: 1.0g acceleration; Continuous:
0.5g acceleration.
Shock
occasional excursions to 15g, 11 ms, half-sine, in each of 3
mutually perpendicular axes.