Kinco-MK
User Manual
Chapter 1 General Introduction
1.1 Summary
Kinco MK series combines the superior technology of Kinco HMI and PLC and the
Internet of Things (M-IoT). It is an economical all-in-one machine product that supports the
Internet of Things functions launched by Kinco Company.
The Kinco MK series all-in-one HMI-PLC retains the high cost performance of the
Kinco HP series of all-in-one machines, but adopts a high-performance CPU and the new
DTools software technology platform for programming the HMI, so as to support more rich
picture components and functions of the new software. In addition, combined with the Kinco
M-IoT technology platform it provides remote download, pass through PLC communication
over the network, VNC remote monitoring, equipment management and other advanced
remote operation and maintenance functions. This will provide more value for our users.
1.2 Product List
DC24V，DI 16*DC24V，DO 14*DC24V，2*AI，1*AO，USB2.0
Programming port (PLC&HMI sharing same programming port).
PLC Part share 2*RS485 COM port, Supports up to 8 KS series
expansion modules. HMI part provides Ethernet interface,
supports access to external network or other Ethernet devices.
DC24V ，DI 16*DC24V ，DO 4*DC24V and 12*Relay.USB2.0
Programming port (PLC&HMI sharing same programming port)
PLC part 2*RS485 COM port, Supports up to 8 Kinco KS series
expansion modules. HMI part provides Ethernet interface,
supports access to external network or other Ethernet devices.
To Next Page
Loading...