WARNINGS
ALL WARNINGS AND RECOMMENDATIONS IN THE FOLLOWING
CHAPTERS MUST BE RESPECTED
THE EQUIPMENT MAY NOT BE OPERATED IN EXPLOSIVE AREAS
IT IS NOT ALLOWED TO WORK WITH FLUIDS WHICH ARE
HIGHLY INFLAMMABLE
IT IS NOT ALLOWED TO MIX MATERIALS WHICH CAN CAUSE
STRONG EXOTHERMAL REACTIONS
THE ELECTRICAL INSTALLATION MUST BE DONE BY A
QUALIFIED ELECTRICIAN !
ENSURE THAT THE RATED VOLTAGE OF THE EQUIPMENT
MATCHES THE SUPPLY
IT IS IMPORTANT THAT THE MAINS SUPPLY WHERE THE DEVICE
IS PLUGGED IN COMPLIES WITH THE INFORMATION ON THE
TYPE LABEL AND THE INTERNATIONAL STANDARDS FOR
POWER SUPPLIES. IF NOT, SUCCESSFUL OPERATION CANNOT
ENSURE THAT ENOUGH FREE SPACE IS AVAILABLE AT THE
BACKSIDE OF DEVICE, SO THAT EFFECTIVE AIR FLOW AND
COOLING IS ASSURED. INSUFFICIENT COOLING MAY LEAD TO A
DECREASE OF POWER OUTPUT
THE DEVICE HAS TO BE PLACED IN A MANNER THAT DIRT OR
FLUIDS CANNOT PENETRATE THROUGH THE VENTILATION
SLOTS AT BACK SIDE OF THE DRIVE
To Next Page
Loading...