THE MAX. OPERATIONAL SPEED IS INDICATED ON THE DATA
PLATE
THE INTENDED USER HAS TO ENSURE THAT NO FOREIGN
PARTICLES WHICH MIGHT LEAD TO A DAMAGE CAN PASS
THROUGH THE UNIT
THE ASSEMBLY AND DISASSEMBLY PROCEDURES ARE
DESCRIBED IN THIS MANUAL
THE UNIT IS ONLY ALLOWED TO BE OPERATED WHEN
ASSEMBLED COMPLETELY
NEVER PULL THE COUPLING DURING OPERATION – THE
WORKING CHAMBER COULD FALL OUT OF THE COUPLING
THE WORKING CHAMBER SHOULD BE CLEANED AFTER EVERY
OPERATION
THE INTENDED USER HAS TO ENSURE THAT USED SOLVENTS
AND CLEANING MATERIALS ARE COMPATIBLE WITH THE
MATERIAL OF THE SEALS AND COMPONENTS OF THE UNIT
THE RESPONSIBILITY OF KEEPING THE OPERATING
PARAMATERS SUCH AS PRESSURE, TEMPERATURE AND
PRODUCT FLOW WITHIN THE SPECIFIED LIMITS LIES WITH THE
INTENDED USER
SHAFT SEALS ARE NOT ALLOWED TO BE SUBJECT TO PRESSURE
To Next Page
Loading...