Kinetico K5 - Non-Air Gap Faucet Installation; Non-Air Gap Faucet Connections; Faucet Connection to Unit; Water on Water (WOW) Tank Installation

K5 Drinking Water Station
Section 7 Drinking Water Systems Revised: 09/2016
Page 12
7. Non-Air Gap Faucet Installation
8. Non-Air Gap Faucet Connections
9. Faucet Connection to Unit
10. Water On Water (WOW) Tank Installation
For Air charge tank installation, skip to Step 11.
11. Air Charge Tank Installation
Note: RO air charge valve assembly must be changed out for correct function with air charge tank.
to air tank
⅜” plug –
part #10641
use air charge kit - part #12797C
(kit includes ⅜” plug - #10641,
air charge valve assembly - #13886)
Do not over torque.
Torque to 20 -25 inch
lbs. turn clockwise
until stops
hand tighten
White Green Yellow Red Blue
to green
collet on tank
to yellow
collet on tank
yellow collet
green collet
to white
collet on faucet
White Green Yellow Red Blue
⅜” quick connect
from white collet
faucet
rubber gasket
mounting washer
washer
lock washer
nut
green
plug
(yellow collet)
White Green Yellow Red Blue