factory is 25 Km/h.
Speed option: 12-40Km/h, use UP or DOWN then confirm
by MODE. Then enter into the interface of backlight
brightness.
5.5 Backlight Brightness
The third setting parameter is backlight brightness. The
interface is as below:
Press UP or DOWN to modify the backlight brightness. You
can choose from level 1 to level 3. Level 1 is the minimum
brightness. Level 3 is the maximum brightness. The default
value of the backlight brightness is level 1. Press the MODE
to confirm the backlight brightness, then entry into the
interface of Choice of Display Unit.
5.6 Choice of Display Unit (Metric system / British system)
The fourth setting parameter is Choice of Display Unit. The
interface is as below:
To Next Page
Loading...
Need help?
General
