Warning：Push cruise control mode is recommended
under push state, not for riding mode.
6.7 Turn On and Turn Off the Backlight
Hold both UP and MODE for 3 seconds and turn on the
SW-LCD backlight, when the surrounding light is not enough
or it is in the evening. Hold both UP and MODE for 3
seconds again and you can turn off the SW-LCD backlight.
When the backlight power ON, the headlight also power on
(if the bike assembles with a headlight). And the function
could be customized.
6.8 Power of the Display
Display the real time power consumption of the riding for
electric bike. The interface below:
To Next Page
Loading...
