Note: The display screen will turn off when Parking Monitor mode is triggered.
(6) Parking Monitor: Off (default)/Low/Middle/High
When the car engine is off, the dash cam will enter parking mode automatically. If
an impact or sudden braking is detected during parking, the dash cam will automatically
start recording a 15-second video and save the content. The video will be locked in
the front or rear emergency folder, preventing it from being overwritten by new
video files. By selecting a higher sensitivity level, your dash cam will be more likely
to detect smaller impacts and trigger emergency recording.
(7) Date Format: YY-MM-DD (default)/DD-MM-YY/MM-DD-YY
You’re free to select a desired date format from the available options.
(8) Audio: On (default)/Off
You can choose to record video with or without audio.
(9) Volume: Mute/Low/Middle (default)/High
You can adjust the camera’s volume to an acceptable level.
(10) Loop Recording: 1Min (default)/2Min/3min
The camera is designed to record video and save the content every minute by
default. When the memory is full, the new video files will overwrite the old ones to
Settings
Antiflicker Mode
Low
Off
60Hz
Collision sensitivity
Parking Monitor
Settings
Collision sensitivity
Off
YY-MM-DD
Low
Parking Monitor
Date Format
Off
Middle
*
Low
Parking Monitor
YY-MM-DD
MM-DD-YY
*
DD-MM-YY
Date Format
To Next Page
Loading...
